Points to note Ctgrain Paddle Mixer operation

1 . Should Ctgrain Paddle Mixer boot after feeding, starting with the material is prohibited , without stopping the machine the material.
2 In the material specific gravity ( bulk density ) ≤ 1 case , the material load should not exceed 60 % of the full amount of volume ( ie, the top of the spiral blade ) . If, in the material specific gravity ( bulk density ) > 1 , the load weight should be consistent with load factor 0.6 . ( Full volume * 0.6 = actual load weight ) .
3 with the liquid spray device , the Ctgrain Bucket Elevator material should be added after the liquid jet , various materials may be mixed simultaneously through the feed opening .
4 The first four dual screw mixer feeding , you should carefully check the materials to ensure that the material must not be greater than Φ8 rigid debris, if found , should be removed prior to feeding debris .
5 Ctgrain Paddle Mixer material mixing time is usually between 6-15 minutes , may also be a longer time, the user can determine the mixing time according to their different needs uniformity .
6 If demanding material mixing uniformity must be achieved by sampling must choose devices with sampling ports . Thereby removing material through sampling ports not directly through the inlet when reclaiming equipment operation , the body may not extend into the barrel and hands more .