Flour electromechanical machine jammed reason

   Why Hammer Mill easy to get stuck? Maybe you flour machine users friends in the time machine in the use of flour, flour machine motors have stuck situation occurs, which is what causes it?
  ① electrical, 3KW motor rated current is only 6A, and now he is 21A, the motor is over load condition, check the mechanical load is unusual, if not replace 11KW motor.
  ② machinery, internal motor is scenic flour impurities, resulting in increased load, dismantle the motor cleanup

Hammer crusher best use and proper installation methods

Hammer Mill is the most widely used one of the primary crushing equipment , especially in the crushing hardness of the material is not great when it is able to maximize the efficiency of the brittleness of the material is also very appropriate, hammer crusher intermediates and fine intermediate crushing brittle materials such as limestone less than coal and other used in metallurgy, building materials, chemical and water - power industry , large crushing ratio , even product size and function of the main equipment .

So how to properly install the hammer crusher it ? Below is off the machine and technical personnel in Henan insights .

First, hammer crusher motor should be strictly in accordance with the requirements of Directive installation location should be easy to operate and observe at any time

Second, the relative position of each device calibration , according to the relevant requirements, and then fixing bolt .

Third, after solidification anchor bolts , check the position of the hammer crusher .

Fourth, a variety of electrical equipment grounding resistance should not be less than 1.0MΩ, motor insulation resistance shall be not less than 0.8 megohms .

Fifth , check the hammer crusher , rotary parts. All moving parts should be flexible , good lubrication, no obstruction .

Sixth, to ensure that the direction of rotation of the motor is the same mark , install the V-belt and adjust its tension .

Hammer crusher for safe operation

1, the inspection must be properly dressed labor protection products , very careful .
2 , regular inspection hammer wear, nicks observe Hammer Mill , hammer connection is vibration, and act accordingly and to reflect their superiors .
3 , crusher size of the crushed material must not exceed the maximum size specified materials .
4 , to observe the operation of the crusher sound , check the hydraulic and lubrication system is normal , abnormal timely contact with the control , depending on the situation and take appropriate measures to promptly report to their superiors .
5 , regular inspection and drive belt loose coupling guard , foundation bolts loose , otherwise they will be promptly tightened.
6 , periodically check the bearing temperature and sound , the body's vibration , abnormal promptly notify the relevant personnel.
7 , when the device during operation , crusher crushing abnormal sounds, stop immediately and notify the relevant personnel and supervisors for detailed examination.
8 , to observe whether there is more than unloading pit required feed size chunks , if once discovered, should be immediately circuit breakers feeding machine for processing.