Hammer Mill is the most widely used one of the primary crushing equipment , especially in the crushing hardness of the material is not great when it is able to maximize the efficiency of the brittleness of the material is also very appropriate, hammer crusher intermediates and fine intermediate crushing brittle materials such as limestone less than coal and other used in metallurgy, building materials, chemical and water - power industry , large crushing ratio , even product size and function of the main equipment .
So how to properly install the hammer crusher it ? Below is off the machine and technical personnel in Henan insights .
First, hammer crusher motor should be strictly in accordance with the requirements of Directive installation location should be easy to operate and observe at any time
Second, the relative position of each device calibration , according to the relevant requirements, and then fixing bolt .
Third, after solidification anchor bolts , check the position of the hammer crusher .
Fourth, a variety of electrical equipment grounding resistance should not be less than 1.0MΩ, motor insulation resistance shall be not less than 0.8 megohms .
Fifth , check the hammer crusher , rotary parts. All moving parts should be flexible , good lubrication, no obstruction .
Sixth, to ensure that the direction of rotation of the motor is the same mark , install the V-belt and adjust its tension .
没有评论:
发表评论