Belt conveyor running operation

1 Close the main power switch, check the device power is being fed properly and the power indicator is lit. To normal after the next step.
2 Close the power switch on each loop, check whether it is normal. Under normal conditions of: device does not operate, belt conveyors running light is not on, inverter and other equipment, power indicator light, the inverter display panel shows the normal (no fault code is displayed).
3 in accordance with the process starts all electrical equipment in turn, starting on a normal electrical equipment (motors or other equipment has reached the normal speed, the normal state) and then the next one electrical device startup.
Belt Conveyor operation, is transported goods must comply with the requirements of the design objects, to comply with belt conveyor design capabilities. Secondly, we must pay attention to all categories of personnel not touch the moving parts of the conveyor belt, non-professionals are not free to contact with electrical components, control buttons, etc.. Finally, in the belt can not run the inverter circuit after the class, such as the identification of maintenance needs, you must stop the inverter in case of operation, otherwise it may damage the drive.
Stop running belt, press the Stop button to stop all pending system only after cut off the mains.